[retronet-octoi] Proper signaling of called party in incoming calls

Hi all, for historical reasons and early bugs in our dialplan I made from the beginning, the first OCTOI users are receiving inbound calls using wrong called-party address. This [still] affects * totalizator * drdeke * marrold * tmwawpl * billy549 * manawyrm * tom * gruetzkopf * roox Instead of receiving inbound calls as [I've been told it was customary] type=subscriber with no area code, the inbound calls actually arrive with potentially undefined/various type-of-number and a 030 prefix. Sending a leading '0' is always wrong in ISDN, as the valid representations of for example my ISDN deskphone are either: ton=subscriber / 12342111 ton=national / 3012342111 ton=international / 493012342111 As you can see, none of those formats have a 0 in front of the area code. I would like to migrate the users stated above to the new scheme (which is already used by a bunch of other users just fine). In the new scheme, the called party number for normal berlin subscribers would always be ton=subscriber without 0, 030 or 30 prefix and just the final 8 'local' digits. I don't want to do this unilaterally and break currently working setups. So please come forward individually and let me know when I should make the switch-over for your line. You can just tell me a date and I'll do it then. Thanks for your attention, Harald -- - Harald Welte <laforge(a)gnumonks.org> https://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)