Hi all,

for historical reasons and early bugs in our dialplan I made from the beginning, the first OCTOI users are receiving inbound calls using wrong called-party address.

This [still] affects

* totalizator * drdeke * marrold * tmwawpl * billy549 * manawyrm * tom * gruetzkopf * roox

Instead of receiving inbound calls as [I've been told it was customary] type=subscriber with no area code, the inbound calls actually arrive with potentially undefined/various type-of-number and a 030 prefix.

Sending a leading '0' is always wrong in ISDN, as the valid representations of for example my ISDN deskphone are either:

ton=subscriber / 12342111 ton=national / 3012342111 ton=international / 493012342111

As you can see, none of those formats have a 0 in front of the area code.

I would like to migrate the users stated above to the new scheme (which is already used by a bunch of other users just fine). In the new scheme, the called party number for normal berlin subscribers would always be ton=subscriber without 0, 030 or 30 prefix and just the final 8 'local' digits.

I don't want to do this unilaterally and break currently working setups.

So please come forward individually and let me know when I should make the switch-over for your line. You can just tell me a date and I'll do it then.

Thanks for your attention, Harald